Hydrogen Water Sprayer

Smart, fashionable Hydrogen Water Sprayer efficiently and rapidly generates hydrogen-rich water

Water is a crucial component of the skin. It constitutes about 65 percent of skin tissue. Every skin cell depends on water. From the mechanism of providing a protective barrier against infections and removal toxins, to preventing loss of moisture and regulating body temperature, proper hydration and nutrition of the skin are key elements to keeping the body healthy, strong and youthful.

TIENS has introduced a smart, fashionable device – the Hydrogen Water Sprayer – which generates hydrogen-rich water to hydrate and protect the skin against external factors such as air pollution or sunlight, which could lead to the formation of free radicals and damage cells. Skin damage caused by oxidative stress can lead to premature skin aging, formation of wrinkles, and other skin problems.

Hydrogen Water Sprayer, built with high quality titanium-platinum electrodes, produces hydrogen-rich water by means of high-efficiency water electrolysis. The hydrogen-rich water, abundant in hydrogen H2 compounds, can easily pass into the skin and penetrate the skin cells. In the deep layers of the skin, hydrogen functions as an antioxidant, helping to neutralize free radicals and prevent cell damage.

Hydrogen-rich water helps to protect skin against premature aging, hydrates deep layers of the skin, and keeps it supple, healthy and glowing. 

Features:

High efficiency hydrogen-rich water production

  • High content of ≥ 1000ppb hydrogen H2 compounds in hydrogen-rich water
  • Small molecular weight and permeability of hydrogen compounds, which can easily penetrate the skin cells
  • Hydrogen-rich water gets rapidly absorbed into deep layers of the skin
  • Highly efficient water electrolysis

Properties of the hydrogen-rich water

  • -400-0mV negative ORP (Oxidation Reduction Potential) potential of hydrogen-rich water can effectively neutralize free radicals
  • High solubility and permeability
  • Strong penetration capabilities
  • Fights free radicals
  • Protects against oxidative stress and skin damage

Long-lasting electrolysis

  • Up to 20 electrolysis, hydrogen-rich water generation cycles per full charge
  • Rapid, highly-efficient electrolysis – hydrogen-rich water ready after 2 minutes
  • High quality titanium-platinum electrodes
  • Long lasting, 4000 mAh Lithium polymer battery

High quality spray head

  • Strong, efficient spray

Smart and fashionable

  • Small and portable
  • Fashionable and modern-looking
  • High value, cutting-edge technology
  • Smaller than a smartphone – fits into a handbag

Safe and secure

  • Waterproof, IPX4
  • Safe, high-quality polymer of body materials

Performance Index

Technical indicators

Parameters

Remarks

Dimensions

32.3x32.3x135.5mm

 

Capacity

15ml

 

Battery

4000 mAh Lithium polymer battery

 

Electrode dimension

Φ21

 

Body material

Food-grade PC

 

Electrolysis time

2 minutes

 

Number of electrolysis cycles per full charge

 ̴20 times

 

Charging time

1-2 hours

 

Hydrogen content

1000ppb

 

ORP potential of hydrogen-rich water

-400-0mV

 

Charging indicator

Red, slowly pulsing (breathing) light

 

Full charge indicator

Long, blue light

 

Low power indicator

Long, red light

No indication when batter is out of power


Content of the package

Hydrogen Water Sprayer

Charging Cable x 1

Product Manual x 1

Quality Certificate x 1

Maintenance

Daily cleaning

To clean, wipe the surface of the device with a fresh, wet and soft cleaning cloth. Unscrew the spray head, fill the bottle half-way with clean, purified water and shake it few times. Pour the water out and screw the spray head back in.

Regular cleaning

Once in a while, after using the device intensely for a long time, the inside of the device and possible mineral build-up on the electrodes will need to be cleaned with citric acid.

In order to clean the device, follow the method below:

Pour citric acid with a 5% concentration (dissolve 5 g of citric acid in 100 ml lukewarm water) into the bottle and soak it for about 20 to 30 minutes, then repeat the daily cleaning, rinsing the bottle with clean water.

Step 1: measure 5 g of citric acid

Step 2: add 100ml of lukewarm water (40-60°C), stir and dilute completely

Step 3: pour citric acid solution into the bottle

Stap 4: Soak for 20-30 minutes and rinse with clean water

Removing odours

After using the device intensely for a long time, the electrodes may have a hydrogen odour. To remove it, pour hot, 60°C clean water into the bottle and let it soak for about 5 minutes, then pour out the water and leave the bottle to dry. 

If the device does not work, read the user manual first.

Instructions for use:

Clean the bottle inside, before using it for the first time. Fill the bottle with lukewarm water (below 60 °C) and soak it for 4 to 8 hours. Next, run the water electrolysis 6 to 8 times, before regular use.

  1. Open the lid and remove the spray head counter-clockwise, fill the bottle with water and then screw the spray head back in clockwise.
  2. Press the button on the bottom of the bottle. The water electrolysis will start. During the electrolysis, the LED light will start gradually changing colour from blue to red. After two minutes, the electrolysis will end and the hydrogen-rich water will be ready for use. If you press the button again during electrolysis, the process will stop.
  3. After the electrolysis has stopped, spray your skin with hydrogen-rich water, by directing the spray nozzle at the part of the body you want to spray and pressing the spray head.
  4. When the device charge is insufficient, the red LED will start blinking.
  5. Charge the device for 1-2 hours with the supplied charging cable. While charging, the red LED light will stay on, slowly blinking from dark to light red. When the device is fully charged, the light will turn blue.
  6. If the device is plugged in during the electrolysis cycle, the LED lights will shine as usual, gradually changing colour from blue to red.

Users should strictly follow the instructions within User Manual. Read the User manual before you install and use Hydrogen Water Spray. You will find the user manual inside the package.

Back to Top